Keyence IM-7030 Image Dimension Measuring System CMM, 2019

Image Sensor: 1” 6.6-megapixel monochrome CMOS
Display: 10.4” LCD monitor (XGA: 1024 x 768)
Receiver Lens: Double telecentric lens

Imaging Measurement/Field of View Wide-Field Measurement Mode: 300 mm x 200 mm (11.81” x 7.87”)
High-Precision Measurement Mode: 225 mm x 125 mm (8.86” x 4.92”)
Minimum Display Unit: 0.1

Repeatability (without stage movement) Wide-Field Measurement Mode: 1
High-Precision Measurement Mode: 0.5

Repeatability (with stage movement) Wide-Field Measurement Mode: 2
High-Precision Measurement Mode: 1.5

Measurement Accuracy (without binding) Wide-Field Mode: 5
High-Precision Mode: 2
With Binding Wide-Field Mode: (7 + 0.02L)
High-Precision Mode: (4 + 0.02L)

Light Probe Measurement:
Measurable Area (XY): 190 mm x 90 mm (7.48” x 3.54”)
Maximum Measurement Depth: 30 mm (1.18”)
Light Probe Diameter: 3 mm
Measuring Force: 0.015 N
Repeatability: 2
Measurement Accuracy: (8 + 0.02L)

Interface:
LAN: RJ45 (10BASE-T/100BASE-TX/1000BASE-T)
USB 3.1: 4 ports (rear: 4)
USB 2.0: Series A 2 ports (front: 2)
External Remote Input: Non-voltage input (with and without contact)
External Output: OK/NG/Fail/Meas. Photomos output rated load 24 VDC 0.5 A, on-resistance 50 or lower
Recording: Hard disk drive: 500 GB

Illumination system:
Transparent: Telecentric transparent illumination
Ring: Four-division, multi-angle illumination (electric)
Slit Ring (directivity): Illumination (electric)

XY Stage Moving Range: 200 mm x 100 mm (7.87” x 3.94”) (electric)
Z Stage Moving Range: 75 mm (2.95”) (electric)

Power supply: 100–240 VAC, 50/60 Hz
Environmental Resistance Ambient Temperature: +10°C to 35°C (+50°F to 95°F)
Relative Humidity: 20% RH to 80% RH (no condensation)
Weight: Approx. 33 kg