DMG Mori NHX 5000 3rd Gen CNC Horizontal Machining Center, 2023 – 20,000 RPM, 240 ATC, 5-Pallet RPS, Fanuc 31i-B, HSK-A63, 1000 PSI TSC
$495,000.00
Machine Type: Horizontal Machining Centers
Make: DMG Mori
Model: NXK5000
Year: 2023
Machine Location: Upon Request
Stock #: 322805
DMG MORI NHX 5000 3rd Generation 4-axis CNC Horizontal Machining Center equipped with a 20,000 RPM SpeedMASTER spindle, Fanuc 31i-B CNC with CELOS control, 240-station automatic tool changer, five-pallet RPS automation system, full fourth-axis rotary table, Renishaw probing, and high-pressure 1,000 PSI through-spindle coolant system.
Manufacturer
DMG MORI
Model
NHX 5000 – 3rd Generation
Machine Type
CNC Horizontal Machining Center
Serial Number
NHX53220405
CNC Control
Fanuc F31i-B with CELOS / MAPPS V
Control Display
21.5″ ERGOline Touch
Number of Controlled Axes
4 (X, Y, Z, B)
X-Axis Travel
28.7″ (730 mm)
Y-Axis Travel
28.7″ (730 mm)
Z-Axis Travel
34.6″ (880 mm)
Maximum Spindle Speed
20,000 RPM
Spindle Motor
50 HP (37 kW) peak
Spindle Taper
HSK-A63
Tool Magazine Capacity
240 Tools, Rack Type
Maximum Tool Diameter
2.76″ Adjacent / 5.51″ Without Adjacent
Maximum Tool Length
21.65″ (550 mm)
Maximum Tool Weight
26.4 lbs. (12 kg)
Pallet Dimensions
19.7″ x 19.7″ (500 x 500 mm)
Pallet System
5-Pallet RPS (Rotary Pallet System)
Pallet Capacity
1,100 lbs. (500 kg)
Maximum Workpiece Diameter
31.5″ (800 mm)
Maximum Workpiece Height
39.37″ (1,000 mm)
B-Axis Indexing
0.001° Full Fourth Axis
B-Axis Maximum Speed
100 RPM
Rapid Traverse X/Y/Z
2,362 IPM (60 m/min)
Through-Spindle Coolant
1,000 PSI (7 MPa)
Coolant Tank
211 Gallons (800 L)
Electrical
220V / 60 Hz
Approximate Machine Weight
26,400 lbs., excluding pallet system
Equipped With / Additional Options
Five-Pallet RPS Automation System with Pallet Manager
240-Position HSK-A63 Rack-Type Tool Magazine
20,000 RPM SpeedMASTER High-Speed Spindle
Full Fourth-Axis Direct-Drive Rotary Table
Fanuc 31i-B CNC Control with CELOS / MAPPS V
21.5″ ERGOline Touchscreen Operator Panel
LNS ChipBlaster smartFLOW 30 Through-Spindle Coolant System, 1,000 PSI, with Cyclonic Filtration and Sludge Tank
Renishaw OMP60 Workpiece Probe
Magnescale Tool Setter for Tool Length, Diameter Measurement and Tool Breakage Detection
Rear-Discharge Drum-Filter Chip Conveyor
Zero Sludge Coolant Tank
Built-In zeroFOG #2 Mist Collector
Full Closed-Loop Scale Feedback / SmartSCALE
Spindle Water-Glycol Cooling System
Machine Protection Control (MPC)
Machine Vibration Control (MVC)
EtherNet/IP Interface
IoTconnector, NETservice and Machine Data Connector
Oil Skimmer
Four-Color Status Signal Light
Manual Pulse Generator
All specifications are assumed to be correct but must be confirmed by the purchasing entity.
Need parts or tooling for this machine? Browse the latest inventory at MROExchange.com.
















