Haas TM-2P VMC, 2018 – Full 4th Axis Rotary, Low Hours

$34,900.00

This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:

X Axis: 40.0″
Y Axis: 16.0″
Z Axis: 16.0″
Spindle Nose to Table (max): 20.0″
Spindle Nose to Table (min): 4.0″

Spindle
Max Rating: 7.5 hp
Max Speed: 6000 rpm
Max Torque: 33.0 ft-lbf @ 1200 rpm
Drive System: Direct Speed, Belt Drive
Taper: CAT 40
Bearing Lubrication: Grease Packed
Cooling: Air Cooled

Table
Length: 57.8″
Width: 10.5″
T-Slot Width: 0.626″ to 0.630″
T-Slot Center Distance: 4.00″
Number of Std T-Slots: 3
Max Weight on Table (evenly distributed): 350 lb

Feedrates
Max Cutting: 400 ipm
Rapids on X: 400 ipm
Rapids on Y: 400 ipm
Rapids on Z: 400 ipm

Axis Motors
Max Thrust X: 2000 lbf
Max Thrust Y: 2000 lbf
Max Thrust Z: 2000 lbf

Tool Changer
Type: Carousel
Capacity: 10
Max Tool Diameter (full): 3.5″
Max Tool Weight: 12 lb
Tool-to-Tool (avg): 5.7 s
Chip-to-Chip (avg): 6.5 s

Air Requirements
Air Required: 4 scfm @ 100 psi
Inline Air Hose: 3/8″
Coupler (Air): 3/8″
Air Pressure Min: 80 psi