800MM Okuma MC-80H HMC – w/ Rigid Tapping Control, Dual Control Display, Pallet Changing Automation
$17,500.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Max. machine capacity: 43.31″ x 36.22″ x 31.50″
Travel:
X-Axis: 43.31″
Y-Axis: 39.17″
Z-Axis: 32.50″
Spindle center to table (pallet) upper surface: -2.95″ to 36.22″
Spindle end to table (pallet) center: 9.84″ to 41.34″
Table:
Table (pallet) size: 31.50″ x 31.50″
Index positions: 360 positions (1 degree increment, direct command)
Load capacity: 3,300 lbs.
Spindle:
Taper hole: NT No. 50
Spindle diameter (at front bearing): 3.94″
Spindle speed range: 30 to 3,600 RPM
Number of spindle speeds: Infinitely variable
Feedrate:
Rapid traverse (X, Y, Z Axis): 512 IPM
Jog feedrates (X, Y, Z Axis): 0.01 to 157 IPM
Tool magazine capacity: 50 tools
Tool selection: Random (fixed address)
Tool shank system: MAS BT50
Pull stud bolt type: MAS Type II
Max. tool diameter:
With adjacent tools: 5.51″
Without adjacent tools (face mill cutter): 9.06″
Boring tool: 11.81″
Max. tool length: 15.75″
Max. tool weight: 44 lbs.
Machine height: 124.02″
MOTOR SPECIFICATIONS:
Main motor: 20
Hydraulic power unit: 9.3 HP
X-Axis drive: 4.8 HP
Y-Axis drive: 4.8 HP
Z-Axis drive: 6.4 HP
-Table indexing: 0.5 HP
Equipped With:
โข Rigid tapping control
โข Dual control display
โข Additional setup and control functions for machine ease of operation
โข Additional control group to run tool changer axis asynchronous to main axis group
โข MTConnect interface for machine data exchange with customerโs Management Information System