9.16.6 Mitutoyo Crysta-Apex Crysta-Apex C9166 CMM, 2005 – Open to Offers
$4,370.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
X-Axis Measuring Range: 35″ (900 mm)
Y-Axis Measuring Range: 63″ (1600 mm)
Z-Axis Measuring Range: 24″ (600 mm)
Mitutoyo/Renishaw Components
Controller: Mitutoyo
Last Calibration: July 2021
Resolution: 0.0001 mm (0.1 ฮผm)
Guide method: Air bearings on each axis
Drive speed – CNC MODE: Drive speed 8 – 300mm/s; max. speed: 519 mm/s
J/S MODE: 0 – 80mm/s (J/S Mode: High Speed); 0 – 3mm/s (J/S Mode: Low Speed); 0.05 mm/s (J/S Mode: Fine Speed)
Max. measuring speed: 8 mm/s
Max. drive acceleration: Each axis: 1,333 mm/s2, max. combined acceleration: 2,309 mm/s2
Workpiece
– Maximum height: 800 mm
– Maximum mass: 1500 kg
Mass (including the control device and installation platform): 2868 kg
Air supply
– Pressure: 0.4 MPa
– Consumption: 60 L/min under normal conditions (air source: 120 L/min)
Additional Details:
-High-Accuracy CNC Coordinate Measuring Machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L /1000)ฮผm
-The machine has a measuring capability of 35โ x-axis, 63โ y-axis, 24โ z-axis at .000004โ resolution
-This was used to measure parts and provide AS9100 inspection reports automatically
-The large dedicated table area enabled high volume production
-Brings versatile and diverse part inspection capability as it can measure five of six component sides without moving the part
-Specifically it can also aids in reverse engineering capability with insulation components
-Excellent for measuring stator housing and core concentricity if wanted
-Dramatically reduces AEMโs measuring times to increase efficiency