Haas EC-400 HMC, 2004 – 12K RPM Spindle, Full 4th axis

Travels:
X Axis: 22.0 in / 559 mm
Y Axis: 25.0 in / 635 mm
Z Axis: 22.0 in / 559 mm

Spindle:
Max Rating: 30.0 hp / 22.4 kW
Max Speed: 12000 rpm
Max Torque: 90.0 ft-lbf @ 2000 rpm / 122.0 Nm @ 2000 rpm
Drive System: Inline Direct-Drive
Taper: BT 40
Bearing Lubrication: Air / Oil Injection
Cooling: Air Cooled

Integrated 4th Axis (B Axis):
90° Rotation Time (full 4th): 3.0 s
Max Weight on Platter: 880 lb / 400.0 kg
Rotational Torque (continuous): 424 ft-lbf / 575 Nm
Backlash: 30 arc-sec
Gear Ratio: 106:1
Min Resolution: 0.001 °
Indexing Accuracy: ± 15 arc-sec
Repeatability: 10 arc-sec
Rapids on B: 150 °/sec

Pallet Changer:
Pallet Quantity: 2
Pallet Length: 15.75 in / 400 mm
Pallet Width: 15.75 in / 400 mm
Max Pallet Load: 880 lb / 400.0 kg
Pallet Change Time: 15 s

Feedrates:
Max Cutting: 833 ipm / 21.2 m/min
Rapids on X: 1400 ipm / 35.6 m/min
Rapids on Y: 1400 ipm / 35.6 m/min
Rapids on Z: 1400 ipm / 35.6 m/min

Axis Motors:
Max Thrust X: 3380 lbf / 15035 N
Max Thrust Y: 2810 lbf / 12500 N
Max Thrust Z: 3380 lbf / 15035 N

General:
Coolant Capacity: 95 gal / 360 L

Tool Changer:
Type: SMTC
Capacity: 30+1
Max Tool Diameter (full): 2.5 in / 64 mm
Max Tool Diameter (adjacent empty): 5.0 in / 127 mm
Max Tool Length (from gage line): 12 in / 305 mm
Max Tool Weight: 12 lb / 5.4 kg
Tool-to-Tool (avg): 2.8 s
Chip-to-Chip (avg): 3.6 s

Air Requirements:
Air Required: 9 scfm @ 100 psi / 255 L/min @ 6.9 bar
Inline Air Hose: 1/2 in
Coupler (Air): 1/2 in
Air Pressure Min: 100 psi / 6.9 bar

Electrical Specification:
Spindle Speed: 12000 rpm
Drive System: Inline Direct-Drive
Spindle Power: 30.0 hp / 22.4 kW
Input AC Voltage (3 Phase) – Low: 220 VAC
Full Load Amps (3 Phase) – Low: 70 A
Input AC Voltage (3 Phase) – High*: 440 VAC
Full Load Amps (3 Phase) – High*: 35 A

Equipped With:
Haas Control
12k spindle
1MB memory
Full 4th Axis
BT-40
Programmable Coolant
Remote Jog Handle
Visual Quick Code