Keyence MD-U1000C 3-Axis UV Laser Marker, 2023 – Low Hours, Open to Offers

*Additional Specs Available Upon Request*

Model MD-U1000C
Type Marking unit (controller + head) Standard area
Marking style XYZ 3-Axis simultaneous scanning method

Type YVO4 laser, Class 4 Laser Product (IEC/EN60825-1, JIS C6802, FDA (CDRH)

Part 1040.10) *1
Wavelength 355 nm
Marking laser
Output 3 W/40 kHz (output at focal point: 2.5 W)
Q-switch frequency CW (continuous wave), 40 to 400 kHz
Guide laser / working distance pointer Semiconductor laser, wavelength: 655 nm, output: 1.0 mW, Class 2 Laser Product

Marking area 125 x 125 x 42 mm 4.92″ x 4.92″ x 1.65″
Standard working distance (±variation width) 189 mm (±21 mm) 7.44″ (±0.83″)
Marking resolution 2 μm
Scan speed Max. 12,000 mm/s 472.44″/s

Marking style Stationary marking, Moving marking (constant, encoder)
Character size (height × width) 0.01 to 125 mm 0.004″ to 4.92″
Number of registered programs 2,000 max.

Marking conditions
Number of blocks 256

Input / Output Terminal block I/O, MIL connector I/O, contactor control I/O
Interface RS-232C, USB2.0, Ethernet (100BASE-TX/10BASE-T) *3
Marking unit installation direction All directions
Marking unit cable length 4.3±0.1 m 14.1′ ±4″
Cooling method Forced air cooling
Overvoltage category II
Pollution degree 2
Enclosure rating IP64 (marking head)

Rated voltage and power consumption 100 to 240 VAC ±10%, 50/60 Hz
maximum 800 (VA)/average 250 (W)
Ambient temperature 0 to + 40 °C 32 °F to 104 °F
Ambient temperature for storage − 10 to + 60°C 14°F to 140°F (no freezing)
Ambient humidity for storage

Environmental resistance
Relative humidity
Up to 85% RH (no condensation)

Weight Controller: 23.5 kg
Marking head: 18.0 kg