Kawaguchi KX220 Injection Molder – 242 Ton, Clean, Ready for Light Production
$19,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Equipment Overview
This 2005 Kawaguchi KX220 offers 242 US tons clamping force and a 3.91 in³ shot volume (~64 cm³, ~62 g per shot PET). Its 2.48 in (63 mm) screw supports small- to mid-cavity molds for PET preforms. The electrical panel confirms standard 208V, 3-phase, 60Hz US power. Shot size supports up to 8 preforms per cycle (7.8 g each) per mold cavity—below the target 16–24 cavity production spec for 460K parts/week.
Key Features and Specifications
Clamping Force: 242 tons
Screw Diameter: 2.48 in (~63 mm)
Shot Volume: 3.91 in³ (~64.1 cm³) = ~62 g PET
Injection Pressure: 21,200 psi
Max Preforms/Shot: ~8 × 7.8 g (62.4 g)
Electrical:
Voltage: 208 V
Phases: 3P
Total Amps: 128 A
Motor: 84 A
Heater: 40 A
Cycle Rate: ~12–18 s expected
Required Auxiliary: PET dryer, mold chiller