6′ x 13′ Omax 80X Waterjet, 2013 – Omax Water Recycling System w/ Water Chiller

Material Support Slats: 4” x 1/8” Galvanized Steel
Maximum Supported Material Load: 400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements: 3-Phase, 380-480 VAC ±10%, 50-60 Hz
Noise Level: Below 80 dBA at one meter for submerged cutting
X-Y Speed: 350 in/min (8,890 mm/min)
Z Speed: 100 in/min (2,540 mm/min)
Linear Positional Accuracy: * ±0.001” (±0.025 mm)
Repeatability: * ±0.001” (±0.025 mm)
Ballbar Circularity: * ±0.0025 (0.0635mm)

WORK ENVELOPE:
X-Y Cutting Travel: * 14’ 0” x 6’ 8” (4,267 mm x 2,032 mm)
Z-Axis Trave: l* 12” (305 mm)
Pump Power: 100 HP w/ 60,000 PSI
Material Supports Slats Size: 4” X ⅛” Galvanized Steel
Abrasive Hopper: 6CUFT
Head: A-Jet

Equipped With:
Omax Water Recycling System w/ Water Chiller
Spare A-Jet Head