6′ x 13′ Omax 80X Waterjet, 2013 – Omax Water Recycling System w/ Water Chiller, A-Jet Cutting Head
$89,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Material Support Slats: 4” x 1/8” Galvanized Steel
Maximum Supported Material Load: 400 lbs/sq ft (1,950 kg/sq meter)
Electrical Requirements: 3-Phase, 380-480 VAC ±10%, 50-60 Hz
Noise Level: Below 80 dBA at one meter for submerged cutting
X-Y Speed: 350 in/min (8,890 mm/min)
Z Speed: 100 in/min (2,540 mm/min)
Linear Positional Accuracy: * ±0.001” (±0.025 mm)
Repeatability: * ±0.001” (±0.025 mm)
Ballbar Circularity: * ±0.0025 (0.0635mm)
WORK ENVELOPE:
X-Y Cutting Travel: * 14’ 0” x 6’ 8” (4,267 mm x 2,032 mm)
Z-Axis Trave: l* 12” (305 mm)
Pump Power: 100 HP w/ 60,000 PSI
Material Supports Slats Size: 4” X ⅛” Galvanized Steel
Abrasive Hopper: 6CUFT
Head: A-Jet
Equipped With:
Omax Water Recycling System w/ Water Chiller
Spare A-Jet Head