Deckel Maho DMC 125 UL S5 5 Axis Machining Center, 2002 – Pallet Pool, 180 ATC

Number of axis Full 5-Axis

Tool changer 180 ATC

Control HH MillPlus iT

Spindle 18,000 rpm

Spindle taper HSK-A63

X axis 49.2″ (1,250 mm)

Y axis 34.6″ (880 mm)

B axis 0-180 degrees simultaneous

Z axis 31.5″ (800 mm)

C axis 360 x 0.001 degrees simultaneous

Maximum diameter 49.2″ (1,250 mm)

Maximum height 48.42″ (1,230 mm)

Maximum weight 3,307 lbs (1,500 kg)

Nc rotary table clamping surface

39.4″ x 31.5″ (1,000 mm x 800 mm)

Nc rotary table maximum load

3,307 lbs (1,500 kg)

Rotation range of table (full 4th axis)

Speed range (spindle) 20-18,000 rpm

Acceleration/deceleration time 2 seconds

Maximum spindle torque 89 lb ft (121 Nm)

Feed rate 0.04-590 IPM (1-15,000 mm/min)

Rapid feed (x-y-z) 1,574 IPM (40 m/min)

Acceleration (x-y-z) 4.5/3.5/6.0 m/s-2

Ballscrews x/y/z 50×20/40×20/40×20 mm

Number of pockets 180

Maximum tool weight 22 lb (10 kg)

Maximum tool length 17.72″ (450 mm)

Equipped with:
BLUM TOOL LASER MEASURING TOOL
SPRAY GUN
CHILLERS FOR SPINDLE AND COOLANT
CHIP CONVEYOR
800 PSI HIGH PRESSURE COOLANT
180 TOOL POSITIONS
HSK-63 SPINDLE TAPER
7 PALLET POOL