DMG Mori Deckel Maho DMU 50eVo 5 Axis VMC, 2005 – B Axis Needs Work
$19,976.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
HEIDENHAIN TNC 530 Millplus CNC control with electronic handwheel
WORK AREA
Traverse path X (longitudinal): 19.7″ (500 mm)
Traverse path Y (across): 16.5″ (420 mm)
Traverse path Z (vertical): 15″ (380 mm)
MAIN DRIVE
AC-motor spindle drive power 100% DC: 33.5 HP (25 kW)
AC-motor spindle drive power 40% DC: 46.9 HP (35 kW)
Spindle speed: 20-18,000 rpm
Spindle taper: CAT 40
Number of gear steps: None
Max Spindle Torque: 95.9 Ft/Lbs (130 Nm)
Spindle Bearing Diameter: 3.15″ (80 mm)
FEED DRIVES
Rapid traverse linear axes X/Y/Z: 1,968.5 ipm (50 m/min)
Feed Range linear axes X/Y/Z: 787.4 ipm (20 m/min)
TOOL MAGAZINE
Storage pockets: 60 positions
Maximum tool weight:13.22 lbs (6 kg)
Maximum tool diameter without vacant places: 3.15″ (80 mm)
Maximum tool diameter with vacant places: 4.13″ (105 mm)
Maximum tool length: 11.02″ (280 mm)
Chip to chip time: Approximately 6 seconds
FLOOD COOLANT
Amount of coolant: 52.8 gallons (200 l)
Flow rate: 5.28 gallon/minute (20 l/minute)
MEASURING SYSTEM
Direct, Heidenhain glass scales, resolution 0.00004″ for X/Y/Z
Heidenhain direct angle encoders for B & C Axes
NC SWIVEL ROTARY TABLE
Clamping surface: 19.7″ x 15.0″ (500 x 380 mm)
Swivel range 5th (swivel) B-axis: 0-180 degrees
Rotation range 4th (rotary) C-axis: 0-360 degrees (continous, full 4th)
Rapid traverse, (swivel) B-axis: 26 rpm
Rapid traverse, (rotary) C-axis: 33 rpm
Maximum table load: 441 lbs (200 kg)
Table measuring system: Direct path measuring system in both axes
Table cooling: Drive cooling for B and C axis with heat exchanger
Table swivel time, horizontal/vertical: Approximately 1.5 seconds