(2) Gleason 463 Hypoid Gear Grinder, 1970
$14,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Max Cone Distance (30-Degree Spiral Angle w/12″ Dia Wheel): 15″/(381mm)
Maximum Pitch Angle, 90-Degree Shaft: 70-DEGREES
Minimum Pitch Angle, 90-Degree Shaft: 5-DEGREES
Maximum Pitch Diameter: (90-Degree Shafts):
0-degree spiral angle, 1:1 ratio: 15.5″/(393.7mm)
0-degree spiral angle, 3:1 ratio: 23″/(584.2mm)
30-degree spiral angle, 1:1 ratio: 21″/(533.4mm)
30-degree spiral angle, 3:1 ratio: 31.5″/(800.1mm)
40-degree spiral angle, 1:1 ratio: 22.5″/(571.5mm)
40-degree spiral angle, 3:1 ratio: 34″/(863.6mm)
Coarsest DP (Module): 2 DP
Coarsest DP (Module) (Metric): 12.7-Module
Maximum Face Width: 3″/(76.2mm)
Work Spdl Taper Hole Dia.(Large End): 3-19/32″
Work Spindle Bore Taper: (Per Ft) 39/64″
Work Spindle Thru-Hole Diameter: 3.87″/(98mm)
Std Grind Wheel OD: 6″-8″
Std Grind Wheel OD (Metric): 1852-203mm
Max. Wkhead Offset Above/Below Ctr: 4.5″
Max. Wkhead Offset A/B Ctr (Metric): 114.3mm
Distance From Machine Center To Spindle Nose: 3″-20.5″
Distance From Machine Center To Spindle Nose (Metric): (76-500mm)
Feed Rate (Seconds Per Tooth): 1.9-11.8
Approx. Floor Space: 135″ x 81″
Approx. Floor Space (Metric): 3429x2057mm
Approx. Overall Machine Ht: 97″
Approx. Overall Mach Ht (Metric): 2464mm
Approx. Machine Net Weight: 23,000 LBS.
Approx. Machine Net Weight (Metric): 10,455 kg’s
Machine Equipped With:
(2) Machines are sold together
Shared coolant tank
Full set of index gears
Full set of cams
Full set of manuals
Assorted grinding wheels and arbors