Tajmac / ZPS Mori Say TMZ 642 Multi Spindle CNC Lathe, 2011 – Refurbished in 2020, Iemca Bar Feeder
$414,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Bar stock dimension: Stock Reel/bar loader
– Circular section: 46/52 mm (1.81/2.04 in)
– Hexagonal section: 38/42 mm (1.49/1.65 in)
– Max. stock length: 4,000 mm (157.48 in)
– Max. length of stock feeding: 150 mm (5.90 in)
SP1 – SP6 axes spindles
– Number: 6
– Pitch diameter: 340 mm (13.38 in)
– Max. speed: 6,000 rpm
– Nominal power machine spindle at 1,000 rpm: 7.6/10.5 kW
– Torque on machine spindle at 1,000 rpm: 68 Nm
– Motor/pulley gear ratio: 2.8
Idle time – Tz:
– 0.7 – 1.6 s
W1 – W5, Z6 axes longitudinal slide drives
– Number: 6
– Max. speed: 30 m/min
– Max. force: 3,400 N
– Max. working stroke: 250 mm (9.84 in)
– Motor/ball screw ratio: 10
– Ball screw lead: .039 in
Longitudinal slides guiding (hexagon)
– Resetting: 60 mm (2.36 in)
X1 – X5, Z1 – Z5 axes compound slides
– Number (stations I,II,III,IV,V): 5
– Max. speed in both longitudinal and cross direction: 15 mm¹/min
– Stroke in longitudinal direction – Z1 – Z5 axes: 120 mm (4.72 in)
– Max. force in longitudinal direction – Z1 – Z5 axes: 3,700 N
– Stroke in cross direction – X1 – X5 axes: 80 mm (3.15 in)
– Max. force in cross direction – X1 – X5 axes: 3,700 N
– Stroke in cross direction – X3 – X5 axes: 90 mm
– Max. force in cross direction – X3 – X5 axes: 2,900 N
– Ball screw lead:
Max. number of rotary tools: 3
Ball screw lead: 5 mm / .19 in
S01 – S06 axes counter-spindles:
Number: 6
Max. speed: 6,000 rpm
High-speed drilling and reaming torque: 9 Nm
Thread cutting device and PICK-UP torque: 20 Nm
Motor/axial tool gear ratio: 1
Longitudinal necking down drive:
Number: 5
Max. speed: 30 m/min
Max. force: 2,200 N
Max. working stroke: 250 mm / 9.84 in
Ball screw lead: 10 mm / .39 in
Parts catcher manipulator:
Arm turning angle: 138°
Feed in longitudinal direction: 225 mm / 8.85 in
Grab pulling-out: 125 mm / 4.92 in
Grab jaws opening: 10 mm / .39 in
Max. component weight: 0.5 kg / 1.1 lbs
Drives of auxiliary functions:
Motor/cam shaft gear ratio: 26
Machine dimensions:
Spindle drum axis height above floor: 1,369 mm / 53.89 in
Total machine length with stock carriage without electric cabinet: 6,428 mm / 253.07 in
— without stock carriage without electric cabinet: 3,696 mm / 145.35 in
Machine width: 2,719 mm / 107.04 in
Machine height: 1,914 mm / 75.35 in
Machine weight:
Machine weight (without stock carriage and chip conveyor with setting tank, 24 controlled axes, without options and oil fillings): 10,750 kg
Electric cabinet weight: 1,000 kg / 2,204.62 lbs
Setting tank weight: 270 kg / 595.24 lbs
Chip conveyor weight: 80 kg / 176.37 lbs