Victor Taichung Vturn-A26/85 CNC Lathe, 2012 – Never Used, Still In Crate
$74,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Capacity
Swing over bed: 35.43in
Between centers: 35.8in
Max. turning dia.: 16.5in
Std. Turning dia.: 13.4in
Bar capacity: 2.95in
Travels
X axis stroke: 8.27+1.97in
Z axis stroke: 33.4in
Spindle
Max. spindle speed: 3,500 RPM
Spindle nose: A2-8
Spindle bore: 3.38in
Inner bearing: 5.12in
Turret
No. of tools: 12
Tool shank size: 1in
Max. boring bar dia.: 2.0in
Exchange time: 0.3 sec
Exchange time (sec) (including disk up
& down): 1.05 (Adjacent), 1.44 (Opposite)
Tailstock
Quill diameter: 4.33in
Quill taper: MT#5
Quill stroke: 3.94in
Feedrate
Rapid traverse rate (ipm): X: 945 Z: 945
Cutting feed-rate (ipm): X/Z=0~50
Motor
Spindle motor (Hp): (aB200Mi-15/22) 20 / 30
Servo motor (Hp): X: 5.4 Z: 5.4
Power Requirement
Standard machine: AC 220V, 3 ph, 50 KVA
Coolant Tank capacity (gal): 95
Machine
L×W×H: 190in×83in×77in
Net weight: 16,720lbs
Equipped with:
Fanuc Oi-TD Control
Fully Programmable Tailstock
Chip Conveyor
Air conditioner for electrical cabinet
Spindle Oil Cooler
Coolant Flush on Z-axis Cover
Complete Coolant System
10″ Kitagawa 3-Jaw Thru-Hole Hydraulic Chuck & 1 Set Soft Jaws
Hand-wheel (remote MPG)
Tool Holders
3-step Warning Light
Splash Guard
Machine Lighting
Toolbox And Tools
Machine And Fanuc Instruction Manuals
Leveling Block
Leveling Plates
Plug For Chuck Bore
Taper Slice 5 each
Mounting block 5 each
Face and O.D. cutting Toolholder 2 each
Face and I.D. cutting Toolholder 1 each
Clamp block 3 each
Boring Bar Holder 2” dia. 1 each
Boring Bar Holder 1½” dia. 3 each
'U' Drill holder 1¼” dia. 1 each
Boring Bar Sleeve 1½” dia. 2 each
Boring Bar Sleeve 1” dia. 2 each
Boring Bar Sleeve ¾” dia. 2 each
Boring Bar Sleeve 5/8” dia. 2 each
Boring Bar Sleeve ½” dia. 2 each
Boring Bar Sleeve 3/8” dia. 2 each
U-Drill socket 1” 1 each
Drill socket M.T.3 1 each
End cap for ‘U’; drill holder 1 each
Coolant block 5 each