Comet MV-54 Vertical Milling Machine, 1991
$4,900.00
This specific product is no longer available, however we may have other similar or identical products in stock. Please utilize our search function at the top of the page to check and confirm, or fill out the form below:
Table Size: 13โณ x 42โณ
Maximum Table Load: 1500 lbs.
Range: Longitudinal (X) 30โณ
Cross (Y): 20โณ
Head (Z): 20โณ
Manual 3rd Axis with DRO.
Quill: 5โณ
Distance From Centerline of Spindle to Face of Column: 20โณ
Minimum/Maximum Distance, Nose of Spindle to Top of Table: 2โณ/22โณ
Quill Diameter: 4 1/8โณ
Spindle Taper: #40 N.S.T.
Spindle Head Swivel โ Plus or Minus 45 Degrees
Infinitely Variable Spindle Speeds, Two Ranges โ 70 to 3800 RPM
Traverse Rate: 250 I.P.M.
Feed rate: .003 โ .006 โ .0015 I.P.M
Equipped With:
DYNAPATH Delta 50-MU three-axis CNC
Manual 3rd axis with DRO.
Manual Pulse Generator, RS-232 Port, Calc-
Assist Package, Conversational Graphics and EIA/G-code Programming
Box Ways on The Column and Cross Ways
Pneumatically Actuated Power Draw Bar
Automatic Lubrication System
Programmable Flood Coolant System with Chip Pan
5 H.P. 3/60/220 volt
Machine is wired for 220 volt operation.
Approximate Weight: 5,500 Lbs.